▼ OUTLET FILTER |
|
1) Open the grille part, separate the | 2) Reassemble it after cleaning or replacing |
exhausted filter. | the filter in the reverse order. |
NOTE: The filters must be completely dried before being replaced in the dust compartment.
USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned.
Select the carpet indicator ➀ when cleaning carpets.
Select flat surface indicator ➁ when cleaning the floors, tiles, etc.
FOR UNIVERSAL BRUSH
Use the floor nozzle for cleaning all surfaces.
NOTE: For optimum efficiency, clean floor brush with crevice tool.
TROUBLE SHOOTING
PROBLEM | CAUSE | REMEDY |
Motor does not start. | No power supply. | Check cable, plug and |
|
| socket. |
|
|
|
Suction force is gradually | Filter, nozzle, suction hose | Remove the object. |
decreasing. | or tube is blocked. |
|
|
|
|
Cord does not rewind fully. | Check that the cord is not | Pull the cord out 2~3m & |
| twisted or wound unevenly. | push down the cord rewind |
|
| button. |
|
|
|
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
CODE NO : DJ68-00068A REV(0.2)
7