Samsung VCC8431V3R/ERP, VCC8431V3R/GEN, VCC8431V3R/XSB, VCC8442V4U/XEU, VCC8451H3B/BOL, VCC8451H3B/ERP, VCC8451H3B/XSB 7CHANGE THE BATTERY(OPTIONAL), WARNING, - IF YOU HAVE A PROBLEM, NOTE, CAUSE, REMEDY, PROBLEM, BATTERY TYPE : AA Size

7CHANGE THE BATTERY(OPTIONAL)

NOTE

1.When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer.

2.Use 2 batteries of size AA.

WARNING	1. Never disassemble or recharge the batteries.
	2. Never heat up the batteries or throw them into fire.

3.Do not reverse (+),(-) poles.

4.Dispose of the batteries properly.

- IF YOU HAVE A PROBLEM

PROBLEM	CAUSE	REMEDY 0
Motor does not start.	No power supply.	Check cable, plug and socket.
	Thermal cut-out.	Leave to cool.

Suction force is gradually	Nozzle, suction hose or tube	Check for blockage and
decreasing.	is blocked.	remove it.
Cord does not rewind fully.	Check that the cord is not	Pull the cord out 2-3m and
	twisted or wound unevenly.	push the cord rewind button.

Vacuum cleaner does not	Crack or hole in hose.	Check hose and replace if
pick up dirt.		required.

Low or decreasing suction	Filter is full of dust.	Please check filter and, if
		necessary, clean as illustrat-
		ed in the instructions.

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.