troubleshooting
PROBLEM | SOLUTION | |
|
| |
Motor does not start | • Check cable, pulg and socket. | |
• Leave to cool. | ||
| ||
|
| |
Suction force is gradually | • Check for blockage and remove. | |
decreasing |
| |
Cord does not rewind | • Pull the cord out | |
fully | button. | |
|
| |
Vacuum cleaner does not | • Check hose and replace if required. | |
pick up dirt |
| |
Low or decreasing | • Please check filter and, if required, clean as illustrated in the | |
instructions. if filters are out of condition change them to new | ||
suction | ||
ones. | ||
| ||
Body overheating | • Please check filters, If required clean as illustrated in the | |
instruction. | ||
| ||
|
| |
| • Please decrease power suction. | |
Static electicity discharge | • This can also occur when air in the room is very dry. | |
| Please ventilate the room to air humidity become a normal. | |
|
|
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
English - 16