Samsung VP-MX10H recording, RECORDING MOVIE IMAGES, button, 38_English, 1.Turn the memory camcorder on, 2.Check the subject on the LCD screen, Recordingstart/stop

recording

Basic procedures to record movie images described below.

RECORDING MOVIE IMAGES

•Memory camcorder provides two Recordingstart/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the Recordingstart/stop button according to the use.

1.Turn the memory camcorder on.

•Connect a power source to the memory camcorder. ➥pages 12,18 (A battery pack or an AC power adapter)

•Slide the POWER switch downward to turn on the power. ➥page 21

•Set the appropriate storage media. (VP-MX10A/MX10AU/MX10AH only) (If you want to record on a memory card, insert the memory card.)

2.Check the subject on the LCD screen.

3.Press the Recordingstart/stop button.

•The recording indicator ( ) will display and recording will start.

•Pressing the Recordingstart/stop button again during recording will set the memory camcorder to recording pause mode.

4.When recording is fi nished, turn the memory camcorder off.

•Setting the display option of "16:9 Wide" does not imply wide angle (wide aspect ratio) recording. Camera output, recording and playback signal is formatted to 4:3 aspect ratio.

•Please note that all movies recorded with this memory camcorder have 4:3 aspect ratio regardless of the display option (16:9 Wide/4:3). When it is set to "16:9 Wide", the displayed picture may appear wider or rougher than that of 4:3 screen aspect ratio. ➥pages 55,61

00:00:00/00:58:00

Recording...

STBY 00:00:30/00:57:30

120 MIN

120 MIN

38_English