ENGLISH
Troubleshooting
Symptom | Possible Causes | Measure |
Focus does not adjust | Focus is set to manual mode | Set focus to AUTO |
automatically | Recording is being done in a dark | Use a lighting apparatus to brighten the scene |
| place |
|
| Lens is covered with condensation | Clear the lens and check the focus |
The Memory card will not load | The memory card is in wrong position | Insert the memory card properly, page 33 |
properly | A foreign object is in the memory | Clear the memory card slot |
| card slot |
|
Colour balance of picture is not | White balance adjustment is | Set proper white balance, page 42 |
natural | required |
|
Files stored in the memory card | Memory card is protected | Remove the protection tab of memory card (except |
cannot be deleted | File is locked | MMC) |
|
| Remove the lock on the file, pages 53, 60, 66, 70 |
Images on the LCD monitor | Ambient is too bright | Adjust the brightness and angle of LCD |
appear dark | Ambient temperature is too low | Low temperatures may produce a dark LCD display |
|
| This is not a malfunction |
Rear of the LCD monitor is hot | Prolonged use of the LCD monitor. | Close the LCD monitor to turn it off, or turn your device |
|
| off to cool down |
The power turns off automatically. | If no keystroke is entered for more | |
| than 5 minutes, your camcorder | And if you do not use this auto power off function, set |
| automatically turns off for power | the <Auto Shut Off> to Off in the menu list. page 86 |
| saving purposes. |
|
| The battery pack is almost exhausted. | |
|
| one. |
108