Samsung SR10M7039WG Accessories, Installation note, Note

Accessories

or
Remote control	Batteries (AAA type)	User manual	Spare filter
(Not included with			(Option)

SR1✴M701✴✴✴ Series)

Docking station	Power cord	Battery charger	Virtual guard
			(option)

✻✻Battery Spec

SR1✴M70✴✴✴✴ series : Lithium-ion, 21.6V, 1800mAh, 6cell

SR2✴M70✴✴✴✴ series : Lithium-ion, 21.6V, 3600mAh, 6cell

Installation note

Note

ffInstall the docking station in a place where the floor and wall are level. ffIt is best to install the docking station along the grain of wooden floors.

ffIf the emergency switch is off, the POWERbot will not charge even if it is docked on the docking station.

ffAlways turn on the power of the docking station.

––If power is not supplied to the docking station, the POWERbot cannot find it and cannot automatically recharge.

––If the POWERbot is left detached from the docking station, the battery will drain naturally.

ffIf the POWERbot is in sleep mode, power will not come on even if the emergency switch is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn the sleep mode off.

ENGLISH-09