1. Manuals
  2. Brands
  3. Laundry Appliance
  4. Washer
  5. Samsung
  6. Laundry Appliance
  7. Washer

Samsung WD1142XVM/YL troubleshooting and information codes, PROBLEM, SOLUTION

1 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 88
Download on canonical page 88 pages, 0 b
troubleshooting and information codes

CHECK THESE POINTS IF YOUR WASHING MACHINE...

PROBLEMSOLUTION

 

 

Will not start..

Make sure the door is fi rmly closed.

 

Make sure your Washer is plugged in.

 

Make sure the water source faucets are open.

 

Make sure to press the Start/Pause Button to start your Washer.

 

Make sure the Child Lock is not activated; see page 23.

 

Before your Washer starts to fi ll, it will make a series of clicking noises

 

to check the door lock and do a quick drain.

 

Check the fuse or reset the circuit breaker

Has no water or not enough

Turn both faucets on fully.

water..

Make sure the door is tightly closed.

 

Straighten the water inlet hoses.

 

Disconnect hoses and clean screens. Hose fi lter screens may be clogged.

 

Open and close the door, then press the Start/Pause Button.

Has detergent remains in the

Make sure your Washer is running with suffi cient water pressure.

automatic dispenser after the

Make sure the Detergent Selector dial is in the upper position when

wash cycle is complete.

using granular detergent.

Vibrates or is too noisy.

Make sure your Washer is set on a level surface. If the surface is not

 

level, adjust your Washer feet to level the appliance.

 

Make sure that the shipping bolts are removed.

 

Make sure your Washer is not touching any other object.

 

Make sure the laundry load is balanced.

Stops

Plug the power cord into a live electrical outlet.

 

Check the fuse or reset the circuit breaker.

 

Close the door and press the Start/Pause Button to start your Washer.

 

For your safety, your Washer will not tumble or spin unless the door is closed.

 

Before your Washer starts to fi ll, it will make a series of clicking noises to check

 

the door lock and do a quick drain.

 

There may be a pause or soak period in the cycle. Wait briefl y and it may start.

 

Check the screens on the inlet hoses at the faucets for obstructions.

 

Clean the screens periodically.

 

 

TROUBLESHOOTING

English-37

YUKON-03073K-08_EN.indd Sec11:37

4/7/2016 11:22:46 PM

MENU

Models

Contents