STEP 4 Connect the water hose
| Connect the water hose to the water tap. |
| 1. Remove the adaptor (A) from the water |
A | hose (B). |
B
2. Use a Philips screwdriver to loosen four screws on the adaptor.
3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
C
Installation
4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
C
English 23
|
| 5/23/2016 5:56:10 PM | |
|
| ||
|
|
|
|