Searching for Music/Voice Files
To search for specific parts during play
●Pull and hold the ❙œœ, √√❙to the left or right during playback to search for the part you want to listen to.
●Release the key to resume play normally.
To change tracks during play
●Pull the √√❙briefly during playback to play the next track.
●Pull the ❙œœ briefly within 5 seconds after playback starts
to move to and play the previous track. Pull the ❙œœ briefly after five seconds to play the current track from the beginning.
To change tracks when stopped
●Pull the ❙œœ, √√❙to the left or right in stop mode to move to the previous/next track.
✍Note
-VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according to the type of sounds, such as their pitch, in the file.
-In the case of a VBR file, you cannot move to and play the previous track even if you push the ❙œœ within 5 seconds after playback starts.
-Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
Listening to FM Radio
First, press the
I Manual Search for a Frequency
● Pull the ❙œœ, √√❙briefly to search manually for the frequency you want.
I Automatic Search for a Frequency
● Pull and hold the ❙œœ, √√❙to search for and stop at frequencies with reception.
I Manual Storage of a Frequency
●After searching manually for the frequency you
want, press and hold the | key to display |
the Save screen. |
|
●Use the ❙œœ, √√❙to select the number you want to assign to save the
frequency and then press the
I Automatic Search for a Frequency
● Press and hold the A↔ B button while in FM Mode. ● Frequencies within the range of 87.50MHz to
108.00MHz are automatically selected and stored.
●Frequencies are automatically stored, starting from 1.
✍ NNoottee
- To exit from FM Mode press the
- Mono (MO) or Stereo (ST) is automatically selected.
26 | 27 |