Diamond Power Products GNSF18Z01 manuals

Diamond Power Products GNSF18Z01 Installation Instructions

32 pages827.95 Kb

GNSF18Z01 GNSF35Z01 GXSF27B GXSF39B
Water Softening
- GE Appliances
- system
  - 215C1044P014 49-50049 0400 JR 7220986
    - www.geappliances.com
  - Safety Instructions
  - Installation Instructions
  - Operating Instructions, Tips
  - Care and Cleaning
  - Troubleshooting Tips Consumer Services
  - Owners Manual & Installation Instructions
  - 2GE & You, A Service Partnership.
    - FOR YOUR RECORDS
      - geappliances.com
      - Troubleshooting Tips
      - Write the model and serial numbers here:
      - # #
        Staple sales slip or cancelled check here.
    - READ THIS MANUAL IF YOU NEED SERVICE
      - Before You Call For Service
      - OR
    - IMPORTANT!
      - Two easy ways to register your appliance!
  - IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.
  - 3WARNING!
    - WARNING:
    - lead-free solder and flux
    - Do not
    - WARNING:
    - electric shock, property damage or personal injury.
    - SAFETY PRECAUTIONS
      - Be sure to use only the included transformer.
    - READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY. SAVE THESE INSTRUCTIONS
    - PROPER INSTALLATION
      - before
      - ahead of the
      - WARNING:
      - Where to Install the Softener
      - DO NOT RUN HOT WATER THROUGH THE SOFTENER.
    - 4Installation instructions.
      - CAUTION:
      - Important Installation Recommendations
      - Unpacking and Inspection
      - 5Where to Install the Softener
      - Plan How You Will Install the Softener
      - Tools and Materials Required for Installation
    - 6Installation instructions.
      - Typical Installation Illustration
        Fig. 2
        NOTE:
        MAIN WATER PIPE
      - Optional 3-Valve Bypass Installation Illustration
        MAIN WATER PIPE
        Drain Hose Connections
        Fig. 1
        7Fig. 3A
        Fig. 3B
        Fig. 4
        Fig. 3C
        8Fig. 4A
        Fig. 5
        Fig. 6
      - 9SmartWater Softener System
      - Programming the Control
      - 10Sanitizing Procedures
        SPECIFICATIONS/DIMENSIONS
- 11}
  - GNSF18
  - (see rating label on water softener)
  - GXSF27
  - GNSF35
  - GXSF39
  - 12Service
    - FILL, BRINING, BRINE RINSE, BACKWASH
    - down
    - up
    - FASTRINSE
  - Automatic Hard Water Bypass During Regeneration
    - However, you should avoid using HOT water because the water heater will fill with the hard water.
  - Fill
  - Brining
  - Brine Rinse
  - Backwash
  - Fast Rinse
  - 13Breaking a Salt Bridge
  - 14Cleaning the Nozzle and Venturi Assembly
    - A clean nozzle and venturi is needed for the water softening system to work properly.
    - NOTE:
    - Install and tighten the cap, by hand only. Do not over-tighten the cap.
  - 15Feature/Service: Automatic Electronic Diagnostics
    - Error Codes
    - SELECT
    - SELECT
    - Manually Initiated Electronic Diagnostics
  - Normal Operation, Control Displays
    - RECHARGE NOW
    - TOUCH or HOLD
    - hold
    - TOUCH or HOLD
    - RECHARGE TONIGHT
    - RECHARGE NOW,
    - RECHARGE TONIGHT
  - Feature: Program Memory
  - Feature: Optional Recharge Controls
    - Two examples:
    - RECHARGE NOW
  - 16Service: Timer/Softener, Service Checkout Procedure
    - VISUAL CHECKS:
    - If you do not find a problem with the visual checks, continue below.
    - ERROR CODE DISPLAYED ERR 01 ERR 02 ERR 03 ERR 04 ERR 05 POSSIBLE DEFECT
    - Service: Electronic Demand Time Features and Service
      - NO SOFT WATER
    - 17Service: Manually Initiated Electronic Diagnostics
  - 18Service: Manually Advance Regeneration Check
  - 19Care and cleaning of the water softening system.
    - Checking the Salt Storage Level and Refilling
    - Cleaning Iron Out of the Water Softening System
  - 20Before you call for service
    - Salt Bridge, water not in contact with salt (see Breaking a Salt Bridge section).
      - Cleaning the Nozzle and Venturi Assembly
        live
        should be continuously
      - Memory
      - if the cold side is plumbed to hard water
      - For example, a single lever kitchen faucet,
      - that does not mix soft and hard water.
      - Be sure sample is from a faucet
        NOTE:
      - Problem Possible Causes What To Do No soft water
      - TOUCH or HOLD
      - Program
        NOTE: The electrical outlet for the softener
      - so it cannot be accidentally switched off.
    - NO SOFT WATER Most Common Problems
      - Check the following before calling for service
      - Salt in softener...at least 1/3 full.
      - By pass valve in Service position. Knob should be in the OUT position.
      - 21Problem Possible Causes What To Do
  - 22Before you call for service
    - Problem Possible Causes What To Do
    - Troubleshooting Tips
    - General Electric Company
      - Warranty Registration Department P.O. Box 32150 Louisville, KY 40232-2150
      - GE Service Protection Plus
        Please place in envelope and mail to:
    - Well Cover Any Appliance. Anywhere. Anytime.*
  - 25
  - 26Consumer Product Ownership Registration
  - - Follow these three steps to protect your new appliance investment:
    - Model Number Serial Number
    - 30Parts catalog.
      - *NOTE:
      - For The Period Of: GE Will Replace:
    - 31GE Water Softening System Warranty
      - Warrantor: General Electric Company. Louisville, KY 40225
        All warranty service provided by our Factory Service Centers, or an authorized Customer Care
        technician. For service, call 800-GE-CARES.
      - What GE Will Not Cover: