HP 3310, 3310xi manual

Contents

USB cable users: Do not connect the USB cable until this 1 guide instructs you to or the software may not install properly 2 Remove all tape and lift display 3 Locate components 4 Attach the control panel faceplate (if not attached) 5 Load paper trays 6 Connect the supplied phone cord 7 Connect the power cord Press the On button and conﬁgure 9 Open the access door 10Lift latches inside of the device 11Insert all six ink cartridges 12Close the access door and follow the prompts 13Turn on your computer 14Choose ONE connection type (A or B or C) A: USB Connection - Do not connect yet B: Ethernet (Wired) Network C: Wireless (Access Point) Connection Section A: USB Connection A1 Insert the correct CD A2 Connect the USB cable A3 Go to back of the guide to make a test copy Section B: Ethernet (wired) network Connect the Ethernet cable B3Go to back of the guide to make a test copy Section C: Wireless (Access Point) Network C1Locate wireless settings Shortcut methods (See requirements below.) C2Start the Wireless Setup Wizard Page 15Install software on additional computers 16Go to back of the guide to make a test copy Troubleshooting Network Troubleshooting Make a test copy