Toshiba B-570-QQ SERIES, EM1-33035, EM1-33035E owner manual

Contents

Main Page Safety Summary WARNING Meanings of Each Symbol CAUTION Precautions Request Regarding Maintenance TABLE OF CONTENTS 1. INTRODUCTION 1.1 Applicable Model 1.2 Accessories 2. SPECIFICATIONS 2.1 Printer 2.2 Option 2-2 2. SPECIFICATIONS 2.4 Ribbon Stop Cut Label Stop 3. OVERVIEW 3.1 Front/Rear View 3.2 Operation Panel 4-1 4. DIP SWITCH FUNCTIONS 4. DIP SWITCH FUNCTIONS The DIP switches are located to the right of the supply shaft. (1) DIP SW 2 (2) DIP SW 1 Supply Shaft Ribbon Shaft 5-1 5. INSTALLING THE PRINTER Connecting the Power Cord and Cables Serial I/F Cable (RS-232C) Expansion I/O Cable Power Cord Parallel I/F Cable (Centronics) Centronics Interface (36 pins, Male) 6. LOADING THE MEDIA NOTE: Do not over tighten the locking ring of the supply holder. Removing the paper holders' upper plates from the media guide An easy way to set the black mark sensor position Setting the feed gap sensor position Page NOTES: Set the selection switch to the REWINDER position. 7. LOADING THE RIBBON 8. INSERTING THE OPTIONAL FLASH MEMORY CARD 9. CARE/HANDLING OF THE MEDIA AND RIBBON 10. GENERAL MAINTENANCE 10.1 Cleaning 10.2 Covers and Panels 10.3 Removing Jammed Paper Cleaning the Cutter Unit 10.4 Threshold Setting Threshold setting procedure 10.5 Auto Ribbon Saving Mode Threshold setting procedure (For firmware version 2.5 or earlier) 11. TROUBLESHOOTING