Manuals
/
Brands
/
Household Appliance
/
Burner
/
Weber
/
Household Appliance
/
Burner
Weber
3500 owner manual
Please, tick the box below to download manual:
Contents
Main
GENESIS3500
Natural Gas Barbecue
Owners Manual
DANGER
WARNINGS
WARRANTY
Page
Contents
FEATURES:
General Instructions
Storage
Operating area
Gas supply testing
General Specifications for Piping
Notice Before Installation
WE RECOMMEND THAT THIS INSTALLATION BE DONE BY A PROFESSIONAL.
flames in the area while you check for gas leaks. This will result in a fire or explosion
death, and damage to property.
Typical natural gas supply installation to a concrete patio or pad
Typical natural gas supply installation over an existing post
Typical natural gas supply installation to a wood deck
Recommended concrete pad requirements
Assembly
Step 1 Check package contents
Note:The locks are taped to the inside of the side burner lid.
Check contents of hardware packs
Step 2 Assemble the frame
Step 3 Continue frame assembly
Step 4 Install side burner locks
Note:The locks are taped to the inside of the side burner lid.
Step 5 Measure and drill holes
Note - With the lid open the depth of the barbecue is
Step 6
concrete patio, new pad or wood deck
Note - With the lid open the depth of the barbecue is
concrete patio, new pad or wood deck (continued)
Note - Use a 3/8 inch diameter concrete drill bit for drilling the hole for the strike anchor.
Page
Step 7 Tighten all frame bolts
concrete patio, new pad or wood deck (continued)
Note - With the lid open,the depth of the barbecue is
Note - Use a 3/16 inch drill bit for drilling a pilot hole for a 3/8 inch lag bolt.
Step 8 Add cooking box
Note: Be careful when sliding the burner tubes through the side frame.
Step 10 Connect barbecue gas supply line to the natural gas supply
Step 9 Install igniter
Step 11 Check all valves are off
Step 12 Install side burner
Page
Step 15 Check for gas leaks
flames in the area while you check for leaks.This will result in a fire or explosion
death and damage to property.
Step 16 Add base panel
Step 17 Install side panels
Step 19 Install the bottom tray
Step 18 Install Flavorizer Bars and Cooking Grates
Step 20 Install Lid
Step 21 Add tool holders, control panel and burner control knobs
Step 23 Install the condiment basket
Step 22 Secure side burner
Step 25 Complete accessory installation
Step 24 Install the accessory rack
Lighting
Note - Always light the FRONT burner first. The other burners ignite from the FRONT burner.
To Extinguish
OPERATING INSTRUCTIONS
Manual Lighting
Note - Always light the FRONT burner first. The other burners ignite from the FRONT burner.
To Extinguish
Lighting the side burner
Cooking
Periodic Cleaning
After a Period of Nonuse
Inspection and Cleaning of the Weber Spider Stopper Guards
Annual Maintenance
death, and damage to property.
flames in the area while you check for leaks. This will result in a fire or explosion
General Maintenance
Weber Spider Stopper Guards
Main Burner Flame Pattern
Main Burner Cleaning Procedure
Replacing Main Burners
Page
Crossover Ignition System Operations
TROUBLESHOOTING
Side Burner Troubleshooting
Side Burner Maintenance
Page
Parts List
A F INAL W
OF THANKS
T