![Radio Frequency (RF) Protection Rearm Timer](/images/new-backgrounds/83606/836065x1.webp)
Radio Frequency (RF) Protection Rearm Timer
Each time the system is disarmed using the transmitter the device will begin a protection mode countdown. This is a timed secondary protection mode. If you do not start your vehicle within 60 seconds, your Silencer system will become rearmed and your engine will become disabled again.
Note: If your system operates from a “Automatic Disarm Transmitter”, the 60 second RF protection timer will not
1-Button Automatic Transmitter Mode Programming
If your transmitter package contains one or more of the
1.Press the middle area of the button and hold it down until the LED light on the side of the but- ton becomes solid red. Release the button.
Note: The LED may flash. Continue holding the button until the flashing stops and the LED becomes solid red.
2.Press and release the center of the button 3 times. You will notice that the red LED light will be off.
3.Press and hold the center of the button until the LED flashes. Release the button.
3flashes = The transmitter is in “Automatic Disarm” mode.
1flash = The transmitter is in “Manual Disarm” mode.
4.Confirm the mode of the transmitter. Press and release the center of the button and watch the flash sequence of the LED.
5.The transmitter operating mode can be changed at any time by following Steps
3