EPSON Stylus Photo RX500

Mechanical

Paper feed method

Friction

Paper path

Sheet feeder, top feed

Sheet feeder

 

capacity

Approx. 80 sheets at 24 lb (90 g/m2)

Dimensions

17.7 × 23.3 × 11.9 inches (W × D × H)

 

449.6 × 592 × 302.3 mm (W × D × H)

Weight

Approx. 19.21 lb (8.7 kg)

Electrical

Input voltage range*

108 to 132 V

Rated frequency

 

 

range

50 to 60 Hz

Rated current

0.8 A

 

Power consumption

Approx. 21 W (ISO 10560 Letter

 

Pattern)

 

 

Approx. 4.0

W in sleep mode

 

Approx. 0.4

W in power-off mode

* Check the label on the back of this product for voltage information

Environmental

Temperature

 

Operation

50 to 95 °F (10 to 35 °C)

Storage*

– 4 to 140 °F (– 20 to 60 °C)

 

1 month at 104 °F (40 °C)

Transit*

– 4 to 140 °F (– 20 to 60 °C)

 

120 hours at 140 °F (60 °C)

Humidity (without condensation)

Operation

20 to 80% RH

Storage*

5 to 85% RH

*Stored in shipping container

Interface

Standard

Based on Universal Serial Bus

 

Specifications Revision 2.0, Universal

 

Serial Bus Device Class Definition for

 

Printing Devices version 1.1

Bit rate

480 Mbps (high speed device)

Data encoding

NRZI

Connector

USB Series B

Recommended

 

cable length

6.6 feet (2 meters)

Safety Approvals

Safety standards

UL 60950, CSA C22.2 No. 60950

EMC

FCC part 15 subpart B class B

 

CSA C108.8 class B

Loading Paper

Single Sheets

1. Open the output tray.

Output tray

2.Pinch the sides of the left edge guide together as you slide the guide all the way to the left.

3.Flip the feeder guard forward.

Feeder guard

4.Insert your paper against the right edge of the sheet feeder. Then pinch the sides of the left edge guide together as you slide it against the paper (but not too tightly).

5.Lower the feeder guard back over the paper.

Also be sure to:

❏Load the printable side face-up. It’s often whiter or brighter than the other side.

❏Load letterhead or preprinted paper top edge first.

❏Load paper short-edge first, even for landscape-oriented documents and photos.

❏Don’t load paper above the arrow on the left edge guide.

❏Load up to approximately 80 sheets of plain paper at a time.

❏If the paper has a cut corner, position it in the upper right corner as you load it in the sheet feeder.

4 - EPSON Stylus Photo RX500

10/03