EPSON Stylus Photo RX500

Envelopes

1.Load up to 10 envelopes at a time, flap edge left, and printable side up, against the right edge of the sheet feeder.

2.Slide the left edge guide against the envelopes (but not too tightly).

Note:

For best results, press each envelope flat before loading, or load one envelope at a time.

3.Select the following settings in your printer software:

❏Plain paper as the Type (Windows®) or Media Type (Macintosh®) setting

❏The correct envelope size as the Size (Windows) or Paper Size (Macintosh) setting

❏Landscape as the Orientation setting

Selecting the Correct Media Type

Select the Type (Windows) or Media Type (Macintosh) setting according to these guidelines:

 

Select this Type or Media

For this paper

Type setting

 

 

Plain paper sheets or envelopes

Plain paper

 

 

EPSON Premium Bright White Paper

Bright White Paper

 

 

EPSON Iron-On Transfer Paper

360 dpi Ink Jet Paper

 

 

EPSON Photo Quality Ink Jet Paper

Photo Quality Ink Jet Paper

EPSON Photo Quality Self Adhesive

 

Sheets

 

 

 

EPSON Matte Paper Heavyweight

Matte Paper - Heavyweight

EPSON Double-Sided Matte Paper

 

PremierArt Matte Scrapbook Photo Paper

 

for Epson

 

 

 

EPSON Photo Paper

Photo Paper

 

 

EPSON Glossy Photo Paper

Glossy Photo Paper

EPSON All-Purpose Glossy Photo Paper

 

EPSON Glossy Photo Greeting Cards

 

 

 

EPSON Premium Glossy Photo Paper

Premium Glossy Photo Paper

EPSON Photo Stickers®*

 

EPSON Premium Luster Photo Paper

Premium Luster Photo Paper

 

 

EPSON Premium Semigloss Photo Paper

Premium Semigloss Photo

 

Paper

 

 

 

Select this Type or Media

For this paper

Type setting

 

 

EPSON ColorLife Photo Paper

ColorLife Photo Paper

EPSON Semigloss Scrapbook Photo

 

Paper

 

 

 

EPSON Ink Jet Transparencies

Ink Jet Transparencies

EPSON Photo Stickers*

 

 

 

*You can use either Premium Glossy Photo Paper or Ink Jet Transparencies as your Type or Media Type setting for Photo Stickers. Experiment to see which setting gives you the best results.

Placing Your Original Document

1.Open the scanner lid.

2.Place your document face-down on the glass, in the corner shown below. Move your document about 0.1 inch from the top and side edge so your entire document is scanned.

3. Close the scanner lid.

Note:

If you place your document against the guides, the edges next to the guides won’t be scanned.

If you need to scan a thick document, such as a book, you can remove the scanner lid. Press the P On button to turn the Stylus Photo RX500 off, then unplug it. Open the scanner lid completely. Then disconnect the cord from the TPU connector on the back of the scanner and pull the lid straight up. Gently press down the original to keep it flat on the document table. Be sure to replace the scanner lid and reconnect the cord when you’re finished.

Copying Without a Computer

Basic Copying

1.Place your document face-down on the glass, as shown in the previous section.

2.Close the scanner lid.

10/03

EPSON Stylus Photo RX500 - 5