II
New Print Cartridge
1 Open the cover by taking hold of both document guides
and tipping the cover backward.
2 Take the new print cartridge from the package.
3 Remove the black protective paper and other packaging ma-
terial, but do not yet remove the protective strip from the
cartridge.
4 Shake the new print cartridge back and forth several times
in order to distribute the toner evenly, thereby improving
the print quality.
5 Only after removing the other packaging, completely
pull off the protection strip located on the left side of the
cartridge
ÆOnce you have removed the protection strip, do not
shake the print cartridge any more. Otherwise, it is
possible that toner dust will be released into the air.
6 Place the print cartridge into your machine. e cartridge
should snap securely into position.
7 Close the cover. Make sure that the cover snaps securely
into position on both sides.
¡ e toner level memory for this starter cartridge
was set at the factory. e starter cartridge need
not be updated with a Plug’n’Print card. For each ad-
ditional print cartridge that you insert into your ma-
chine, you must update the toner level memory with the
Plug’n’Print card provided.