Eyebolt Applications
For Installation of
Control 29AV
When suspending JBL Control 29AV loudspeakers, you MUST utilize Load-Rated Steel Forged Shoulder Eyebolts. The load rating must be stamped on the side of the eyebolt and there must be a shoulder, as shown in Fig 1. The correct threading for the Control 29AV is M6. This means that the threaded shaft has a diameter of 6mm. The threaded shaft length will vary according to which insert point is being utilized.
Top & Bottom Inserts --When using the installation points at the top and bottom of the cabinet, where the flat surfaces are, the eyebolt threads directly into the insert. Be sure to tighten the bolt all the way down so that the shoulder is snug against the surface of the cabinet. To do this, you must ensure the correct length of bolt so that the threads do not “bottom out” (stop turning) before the shoulder reaches the cabinet surface. For the top or bottom inserts, the shaft should be 12mm (1/2 inch). See Figure 2:
For top or bottom inserts, use 6 mm x 1mm pitch x 12 mm thread length steel forged shoulder
eyebolts
