321 Studios Plesk 7.x Reloaded, Plesk 8 manual The Administrator Module

The Administrator Module

The QMAILIDHOST environment variable overrides idhost.

•localiphost – This is the replacement host name for local IP addresses. Default: me, if that file is provided by the server administrator. Qmail- smtpd is responsible for recognizing dotted-decimal addresses for the current host. When it finds a recipient address with the form box@[d.d.d.d], where d.d.d.d is a local IP address, it replaces [d.d.d.d] with localiphost. This is done before rcpthosts.

•plusdomain – This is the plus domain name. Default: me, if that file is provided by the server administrator. Otherwise it will be plusdomain. Qmail-inject adds this name to any host name that ends with a plus sign, including defaulthost, if this ends with a plus sign. If a host name does not have dots but ends with a plus sign, qmail-inject uses plusdomain, not defaultdomain.

The QMAILPLUSDOMAIN environment variable overrides plusdomain.

•queuelifetime – The number of seconds a message can stay in the queue. Default: 604800 (one week). After this time expires, qmail-send will try to send the message once more, but it will treat any temporary delivery failures as permanent failures.

•smtpgreeting – The SMTP greeting message. Default: me, if that file is provided by the server administrator. Otherwise qmail-smtpd will refuse to run. The first word included in the smtpgreeting should be the current hostname.

•timeoutconnect – The number of seconds qmail-remote will wait for the remote SMTP server to accept a connection. Default: 60. The kernel normally imposes a 75 seconds upper limit.

•timeoutremote – The number of seconds qmail-remote will wait for each response from the remote SMTP server. Default: 1200.

4PSA Qmail Manager 1.1.6 for Plesk 8 / Plesk 7.x Reloaded User’s Guide 15