Epson Perfection 2580 Photo
3.Place a 35 mm slide into the holder with its shiny base side facing down. Your image should appear backwards on the side that faces up.
Place the top of the image toward the left side of the scanner.
4.Close the scanner cover.
5.To scan your slide, press the 4 Scan and Save button or open EPSON Smart Panel and select Scan and Save. This scans your slide using ideal settings in Full Auto Mode and opens it in ArcSoft PhotoImpression for viewing, editing, and printing. See your
6.When you’re finished scanning, you can store the slide holder in the scanner cover. Slide the holder into the cover, then replace the document mat.
Start Light
The scanner’s ] Start light indicates the scanner status.
] Start light | Scanner status |
|
|
Flashing green | Warming up or scanning. |
|
|
Green | Ready to scan. |
|
|
Flashing red | Make sure the transportation lock is unlocked. |
| Try restarting your computer and unplugging the |
| scanner. Wait 10 seconds, then plug the scanner |
| back in. |
| Film may be jammed in the auto film loader. |
| Disconnect the scanner from the computer, wait |
| 10 seconds, and connect it to the computer again |
| to see if the film ejects on its own. If film is still |
| jammed, see your |
| If the red light is still flashing, contact your dealer |
| or Epson. |
|
|
Off | Make sure your scanner is connected to your |
| computer and plugged into a power source. |
|
|
Transporting the Scanner
Before transporting the scanner for a long distance or storing it for an extended period of time, you need to lock the scanner’s carriage to prevent damage.
1.Plug in the scanner, connect it to your computer, and wait until the carriage moves to the home position (position nearest the buttons). While the ] Start light is green, unplug the scanner.
2.If the cover cable is attached, disconnect it.
6/04 | Epson Perfection 2580 Photo - 5 |