3Com 3C16895 - page 52

52 CHAPTER 4: MAINTAINING SOFTWARE
Trying ...
Press CTRL+K to abort
Connected.
220 3Com 3CDaemon FTP Server Version 2.0
User(none):anonymous
331 User name ok, need password
Password: xxxxxxx
230 User logged in
[ftp]bin
200 Type set to I.
[ftp]get sw7750003.app
200 PORT command successful.
150 File status OK ; about to open data connection
226 Closing data connection; File transfer successful.
FTP: 3794803 byte(s) received in 130.480 second(s)
29.08Kbyte(s)/sec.
[ftp]quit
221 Service closing control connection
<SW7750>boot boot-loader primary sw7750003.app
The specified file will be booted next time!
<SW7750>reboot
This will reboot Switch. Continue? [Y/N] y
For more detailed descriptions of the setup and procedures for upgrading
software, see the remaining sections in this chapter.
Upgrading Software
Using The BOOT Menu
To perform this procedure, you must have a network connection to the
management port on the Switch 7750 Fabric module.
After powering on the Switch 7750, the BootROM program runs automatically.
The terminal displays the following information:
Starting......
RAMLine.....OK
System is booting.....................
******************************************
* *
* Switch 7750 BOOTROM, Version 500 *
* *
******************************************
Copyright (c) : 2003-2005 3Com Corporation
Creation date : Jan 20 2005, 09:37:12
CPU type : MPC8245
CPU Clock Speed : 400Mhz
BUS Clock Speed : 66Mhz
BOOT_FLASH type : M29W040B
Flash Size : 32MB
Memory Size : 256MB