About Your Access Point (front)

Installation Guide

1

2

3

4

 

 

 

WLAN

LAN Status

3CRWE454A72

 

 

 

Alert

Power

11g 11a

 

 

OfficeConnect Wireless 11a / b / g Access Point

OfficeConnect®

Wireless 11a/b/g Access Point

(3CRWE454A72)

1Alert LED orange

Indicates a number of different conditions, as described below. Off – The Access Point is operating normally.

Flashing quickly – Indicates one of the following conditions:

the Access Point has just been started up and is running a self-test routine

the administrator has invoked the Reset to Factory Defaults command

the system software is in the process of being upgraded

In each of these cases, wait until the Access Point has completed the current operation and the alert LED is Off.

Flashing slowly – The Access Point has completed the Reset to Factory Defaults process, and is waiting for you to reset the unit. To do this, release the reset button and allow the unit to restart. The Access Point will then enter the start-up sequence and resume normal operation.

Continuously on – A fault has been detected with your Access Point during the start-up process. Refer to the main User Guide.

2Power LED green

Indicates that the Access Point is powered on.

3Wireless LAN (WLAN) Status LED green

If the LEDs are on it indicates that wireless networking is enabled. If the LED is flashing, the link is OK and data is being transmitted or received. If the LED is off, the Wireless LAN has been disabled in the Access Point, or there is a problem (refer to the User Guide).

4LAN Status LED green (100Mbps link) / yellow (10Mbps link)

If the LED is on, the link between the port and the next piece of network equipment is OK. If the LED is flashing, the link is OK and data is being transmitted or received. If the LED is off, nothing is connected, or the connected device is switched off, or there is a problem with the connection (refer to the User Guide). The port will automatically adjust to the correct speed and duplex.

3Com Corporation, Corporate Headquarters, 350 Campus Drive, Marlborough, MA 01752-3064

Copyright © 2003 3Com Corporation. All rights reserved. 3Com, the 3Com logo, and OfficeConnect are registered trademarks of 3Com Corporation.

Microsoft, MS-DOS and Windows are registered trademarks of Micorsoft Corporation. All other company and product names may be trademarks of their respective companies.

Part number: DIA0045-4AAA01 Published: December 2003

About Your Access Point (back)

6

7

 

 

5

8

9

5

 

OK

 

 

 

Ethernet

RESET

 

5

Wireless Antennae

8

Ethernet port

 

The antennae on the product should be placed in a ‘V’ position.

 

Using suitable RJ45 cable, you can connect your Access Point to a

6

 

 

computer, or to any other piece of equipment that has an Ethernet

Power Adapter socket

 

connection (for example, a hub or a switch). This port has an automatic

 

Only use the power adapter that is supplied with this Access Point. Do not

 

MDI/MDIX feature, which means either straight-through or a crossover

 

use any other adapter.

 

cable can be used.

7 Power Adapter OK LED green

9

Reset Button

 

Indicates that the power adapter is supplying power to the Gateway. If the

 

If you want to reset your Access Point to factory default settings, and

 

LED is off, there may be a problem with the power adapter or adapter

 

cannot access the web management interface (for example, due to a lost

 

cable.

 

password), then you may use this button. Refer to the User Guide for

 

 

 

further details.

Page 1
Image 1
3Com 3CRWE454A72 manual About Your Access Point front, About Your Access Point back

3CRWE454A72 specifications

The 3Com 3CRWE454A72 wireless router is an innovative networking solution that offers robust connectivity features for both home and small business environments. As part of 3Com's esteemed product lineup, this device is designed to fulfill the increasing demands for wireless networking while ensuring exceptional performance and reliability.

One of the main features of the 3CRWE454A72 is its advanced 802.11g Wi-Fi technology, which operates in the 2.4GHz frequency band. This allows for data transmission speeds up to 54 Mbps, supporting a wide range of applications from web browsing to streaming video. The router also includes backward compatibility with 802.11b devices, ensuring that users with older technology can still enjoy seamless connectivity.

Security is paramount in today's digital landscape, and the 3CRWE454A72 addresses this with multiple encryption methods. It supports WPA and WPA2 (Wi-Fi Protected Access) protocols, which provide a high level of security for wireless networks. This is crucial for users looking to protect sensitive information from unauthorized access. Additionally, the device includes features like MAC address filtering and a robust firewall to further enhance network security.

The router is equipped with four Ethernet ports that support automatic MDI/MDI-X configuration, allowing for easy wired connections to a variety of devices such as computers, printers, and gaming consoles. This versatile setup enables users to create a hybrid network environment that combines the convenience of wireless access with the stability of wired connections.

Installation and configuration of the 3CRWE454A72 are user-friendly, thanks to its web-based interface and guided setup process. This makes it accessible even for those who may not be tech-savvy. The device also includes features such as Quality of Service (QoS) settings, allowing users to prioritize bandwidth for specific applications or devices, ensuring smooth performance for critical tasks.

In conclusion, the 3Com 3CRWE454A72 wireless router stands out for its combination of speed, security, and ease of use. With its comprehensive features and technologies, it provides a reliable and efficient networking solution suitable for various users, making it a commendable choice for both personal and small business applications.