Fiber Optic Tools
www.idealindustries.com 1-800-435-0705 for Customer Service
G-32
Lite-Strip™Optical Fiber Stripper
V-notch blades strip a wide range of
outer cable jacket. Precision-ground,
replaceable knife-type blades strip
tight buffer tube insulations
(900µm). Also strips
mechanically strippable
coatings from 250
microns to 900
microns.
nReplaceable precision-ground blades cleanly strip buffer
coatings
nNew funneled hole makes cable insertion easier
nImproved spring mounting returns handles to original position
after every application
nOne-step, 900 micron stripping hole provides broader
stripping range
nExtra durable to withstand normal drops without requiring
tool realignment
nNew gauge color makes fiber and hole identification easier
nImproved comfort-grip handles for an easier, more comfortable
stripping process
Description Fiber Sizes Cat. No.
Lite-Strip™Optical Fiber Stripper (900µm/250µm) 125µm, 140µm 45-350
Split-Tip Fiber Optic SwabsPolishing Films for Fiber Optic Connectors
nSplit-tip design cleans fiber easier
and more efficiently than other
methods
nTube/handle is pre-loaded
with 99% isopropyl alcohol
nA single swab can be used
for many cleanings or until the
alcohol is gone
Description Qty.Cat. No.
Split-Tip Fiber Optic Swabs Bag of 20 45-360
nFor optimum connector
polishing results, we
recommend a three-step
procedure using 0.5µm,
3µm and 12µm 3 in. x 6 in.
aluminum oxide polishing
films
nLot-to-lot consistency in our
films means repeatable connector
finishes on ceramic, stainless steel,
plastic and composite ferrules
nA single sheet will typically yield 10 to 20 connectors when using
the recommended 3-step procedure
Description Color Qty. Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide Ivory 20 films/sleeve 45-337
3.0µm, 3” x 6”, Aluminum Oxide Lt. Yellow 20 films/sleeve 45-338
12µm, 3” x 6”, Aluminum Oxide Lt. Red 20 films/sleeve 45-339
Plastic Polishing Fixture
nUniversal fitting accepts all ST®, SC
and FC connectors with 2.5mm
ferrules
nEconomically priced
nGrooved face for polishing efficiency
nPrecision tool used by manufacturers, contractors and
in tool kits
Description Cat. No.
Plastic Polishing Fixture 45-342
Note: ST®is a registered trademark of AT&T.
Stainless Steel Polishing Fixture forOptical Fiber ST®and SC Type Connectors
Produces polished fiber optic ST®and
SC type connectors for optimum
connector performance.
nPrecision-machined, stainless-steel
disk provides accurate polishing angle
for desired end face finish
nStainless-steel hardness maintains long life and resists
uneven wear
nStepped surface reduces drag and friction for easier polishing
Description Qty. Cat. No.
Polishing Fixture for Optical Fiber 145-341
SC/ST®Type Connectors
Note: ST®is a registered trademark of AT&T.
45-339
45-338 45-337
Stripmaster®Ribbon FiberJacket Stripper
Description Cat. No.
Stripmaster®Wire Stripper Frame only L-5620
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable LB-1153
Note: Kevlar®is a registered trademark of DuPont.
nRemoves jacket from Ribbon Fiber without
damage to the Kevlar®strength member of
the Ribbon Fiber
Note: Frame and blade-set sold separately.
Section G - DataComm 10/22/08 8:37 AM Page 32