Page 2 GSM Upgrade Kit Handbook
System requirements
To upgrade the software on your modem, the following components
are needed:
■Palm V or IBM WorkPad c3 organizer.
■Microsoft® Windows 95®, Windows 98®, Windows NT®. If you
have a Palm V organizer, you can also use an Apple Macintosh™
with operating system 7.5.3 or later.
■Palm Desktop 3.0 or later for Microsoft Windows. If you have a
Palm V organizer, you can also use Palm™ Desktop organizer
software 2.1 for the Apple Macintosh.
Before you begin
Before you begin to upgrade your modem, make sure:
■No cables are attached to your modem.
■The HotSync® Manager on your computer is active.
■The battery in your organizer is fully charged.
■The batteries in your modem are new.
Instructions
Upgrading your modem involves the following procedures:
■Installing the Modem Utility application onto your computer’s
desktop (Microsoft Windows or Apple Macintosh).
■Performing a HotSync operation to install the Modem Utility
application onto your organizer.
■Starting the Modem Utility application to upgrade your modem.
■Deleting the Modem Utility application from your organizer.

Installing the Modem Utility application onto your

computer (Microsoft Windows)

1. Insert the Modem Utility CD-ROM into your computer’s CD-ROM
drive.
2. On your computer, copy the Modem Utility application into the
add-on folder in the Palm directory on your computer’s hard
drive.