SM69 Rev. 4.00 | AA12S Series Compact Audio Controller Manual |
Section 2 Installation
2.1Introduction
Information in this section consists of: unpacking and inspection procedures, installation procedures,
2.2Unpacking and Inspection
Unpack the equipment carefully and locate the warranty card. Inspect the unit visually for damage due to shipping and report all such claims immediately to the carrier involved. Note that each unit should have the following:
-AA12S Series Compact Audio Controller
-Warranty Card
-Operator’s Manual
-Release certification
Verify that all items are present before proceeding and report any shortage immediately to your supplier.
2.2.1Warranty
Complete the warranty card information and send it to NAT when the installation is complete. If you fail to complete the warranty card, the warranty will be activated on date of shipment from NAT.
Note: An appropriately rated facility, e.g. Certified Aircraft Repair Station, must install this equipment in accordance with applicable regulations. NAT Ltd’s warranty is not valid unless the equipment is installed by an authorized NAT Dealer. Failure to follow any of the installation instructions, or installation by a
2.3Installation Procedures
2.3.1Warnings
Do not bundle any lines from this unit with transmitter coax lines. Do not bundle any audio or DC power lines from this unit with 400 Hz synchro wiring or AC power lines. Do not position this unit or wiring from this unit next to any device with a strong alternating magnetic field such as an inverter, or significant audio interference will result.
Oct 13, 2005 | Page |
|
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.