REMOTE SENSOR (FIG 3)
2
1
3
1.LED status indicator
2.Wall mount hole
3.Battery compartment
4.RESET hole
5.CHANNEL switch
EN
LOCATION | MEANING |
| |
|
|
Clock / alarm | Main unit batteries low |
|
|
Outdoor temperature | Sensor batteries low |
and humidity area |
|
|
|
REMOTE SENSOR
4The main unit can collect data from up to 3 sensors.
5To set up the sensor:
1.Open the battery compartment (see FIG 3).
2.Select a channel then press RESET.
3.Close the battery door.
4.Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 1.5 m (5 ft) and which can shield it from direct sunlight or wet conditions for an accurate reading.
GETTING STARTED
INSERT BATTERIES
1.Remove the battery compartment.
2.Insert the batteries, matching the polarities (see FIG 2).
3
RMR203HG IM EN R5.indd 3
2007.8.9 5:27:41 PM
