Note:

If you’re setting up your computer for the first time, you may see a message asking if you want to install a printer. Select Cancel and then complete your Windows 95 setup. You will be prompted to restart Windows. If you then see the New Hardware Found screen, follow the instructions under “Windows 95 Plug and Play” to install your printer software. If you don’t see the New Hardware Found screen, follow the instructions under “While Running Windows 95” on page 10.

If your computer is on a network and you connected the printer to a remote server, you need to set up the printer for network use after installing the printer software. See Chapter 4 of your User’s Guide for instructions.

While Running Windows 95

1.Make sure Windows 95 is running and the printer is on. Exit any open applications.

2.Insert the EPSON printer software CD-ROM (or diskette 1) in your drive.

3.If Windows 95 launches the install program automatically, you see the EPSON Setup CD window click Next. At the next screen, click the Install icon.

If it doesn’t launch automatically, double-click the My Computer icon; then double-click your CD-ROM drive icon. You see the EPSON Setup CD window. Click Next. At the next screen, click the Install icon.

(If you’re using diskettes, double-click your diskette drive icon and click the Setup icon.)

4.Select Epson Stylus COLOR 600 in the printer Model Tab and click OK. Follow the instructions on the screen to install the software.

The installer creates an EPSON folder for your printer software icons and adds an icon for your printer to the Printers folder.

If you installed your software from the CD-ROM, EPSON Answers opens automatically.

After running EPSON Answers, click the EPSON Look Your Best Color Pak icon in the EPSON folder to install your creative software and check out the extras.

To run EPSON Answers, click its icon in the EPSON folder.

10