3M specifications 3M 718A Air Ionizer Test Kit, Calibration and Certification

4

3M 718A Air Ionizer Test Kit

3M™ 718A Air Ionizer Test Kit

When used with the 3M™ 718 Static Sensor, the 3M 718A Air Ionizer Test Kit can provide periodic verification of air ionizer performance. The 718A consists of a charge plate and a charger. The system as a whole is designed to meet the guidelines specified in ESD Association Draft Standard D3.3.

The charge plate slides over the housing of the 718. Placing the 718 in the air flow of an air ionizer allows for measure-

ment of the ionizer’s offset balance. The charger can be used to deposit an electrostatic charge on the plate. Measuring how long it takes the ionizer to neutralize this static charge gives the ionizer discharge time.

Calibration and Certification

The 3M 718 Static Sensor can be ordered as calibrated and certified by a 3M ISO9002 Registered Metrology Laboratory. Calibration can be traced back to National Institute of Standards and Technology (NIST) standards, as specified in MIL-STD-45662.

3M 718A Air Ionizer Test Kit Specifications

Charge Plate Assembly	Per ESD Association Draft Standard D3.3
Charge Plate Bracket	1" (H) x 3.1" (W) x 4.25" (L)
Dimensions	2.5 cm (H)	x	7.9 cm (W) x 10.8 cm (L)
Charge Plate Area	3.25" (W)	x	1.25" (L)
	8.3 cm (W) x 3.2 cm (L)
Charge Plate Assembly Weight	2.5 oz (70 g)
Charger Dimensions	0.85" (H) x 2.4" (W) x 5.0" (L)
	2.2 cm (H) x 6.1 cm (W) x 12.7 cm (L)
Charger Weight	6 oz. (170 g) with battery
Charger Power Requirements	One 9 volt alkaline battery
Charger Output	Positive: 1250 V ± 5%
	Negative: -1250 V ± 5%
Certifications	UL, C-UL, CE, CB-scheme, NOM

For ordering information, technical information, product information, you can reach us at:

Phone 1-800-328-1368

Fax 1-800-828-9329 or 1-512-984-2210

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

3

Electronic Handling & Protection Division

6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/ehpd

Recycled paper		Litho in USA.
40%	Pre-consumer waste paper	© 3M IPC 2000 98-0799-0473-0 (x0xx.x)JHA/
10%	Post-consumer waste paper