2.0 Installation and Assembly of 3M™ Anti-Fatigue Mat Runner 9910

WARNING:

To reduce the risk associated with hazardous voltage due to Anti-Fatigue Mats 9900 Series being used in areas requiring insulating type matting:

•Anti-Fatigue Mats are electrically conductive – do not use this matting in areas with possible exposure to high voltage.

To reduce the risk associated with hazardous voltage due to Anti-Fatigue Mats being installed with an incorrect grounding lead:

• Do not use Anti-Fatigue Mats without using the correct grounding cord, 3M™ Ground Cord 3040.

To reduce the risk associated with hazardous voltage due to Anti-Fatigue Mats being grounded through an alternate ground path:

•Grounded equipment or objects should not contact the mat. This could bypass the 1.0 MΩ resistor in the ground cord.

To reduce the risk associated with back strain due to the heavy weight of the mats:

•Follow safe lifting procedures during installation or moving.

1.Pre-clean the floor area where the mat runner is to be installed.

2.Before assembling the runner, lay out each mat section in the appropriate sequence. Sequence numbers can be found on the back of each section along the molded rubber edge. Match the numbers so the number on one section is next to the same number on the next section. (Figures 1 - 3)

Figure 1Figure 2Figure 3

3. Move the end section of the runner with connector tabs into the desired position with the tubular cells against the floor surface. Place the next runner section in position according to its sequence number. Proceed in like manner placing each runner section in position according to the numbering sequence until the whole runner is laid out unconnected on the

floor. (Figure 4)

Figure 4

6

Page 5 Page 7
Page 6
Image 6
3M 9900 Series manual Installation and Assembly of 3M Anti-Fatigue Mat Runner, Figure
Page 5 Page 7

9900 Series specifications

The 3M 9900 Series represents a significant advancement in personal protective equipment, specifically designed for environments that require enhanced respiratory protection. This series is widely recognized for its innovative features, exceptional performance, and user-centered design, making it a top choice for professionals across various industries, including construction, healthcare, and manufacturing.

One of the standout features of the 3M 9900 Series is its advanced filtration technology. The series utilizes a combination of innovative filter materials that provide superior protection against airborne contaminants, ensuring that wearers are safeguarded from harmful particulates, aerosols, and gases. The filtration efficiency is notably high, allowing for extended use in demanding conditions while maintaining comfort and breathability.

Another key characteristic of the 9900 Series is its ergonomic design. The masks are engineered to fit the contours of the face, reducing the likelihood of gaps that can compromise protection. This snug, comfortable fit allows for extended wear without discomfort, ensuring that users can perform their tasks without distraction. Additionally, the adjustable head straps provide a customizable fit, further enhancing the mask's effectiveness and usability.

The 3M 9900 Series also incorporates a unique exhalation valve, which plays a critical role in comfort during prolonged use. This valve allows for easier exhalation, reducing heat and moisture buildup inside the mask. As a result, wearers experience less fatigue and discomfort, making it ideal for tasks that require extended periods of respiratory protection.

Durability is another prominent feature of the 3M 9900 Series. The materials used in the construction of the masks are robust and designed to withstand the rigors of demanding environments. This durability ensures that users can rely on the 9900 Series for long-term use, making it a cost-effective choice for organizations.

Moreover, the 3M 9900 Series complies with stringent safety standards, providing users with the assurance of high-quality performance. The masks undergo rigorous testing to meet regulatory requirements, ensuring that they deliver reliable protection.

In summary, the 3M 9900 Series is a cutting-edge solution for respiratory protection, characterized by advanced filtration technology, ergonomic design, innovative exhalation valves, and superior durability. With a strong commitment to safety and comfort, the 3M 9900 Series stands as a trusted choice for professionals seeking reliable respiratory protection in challenging environments.
Top Page Image Contents