ScotchlokE-9BM Crimping Tool

812031

Application

The ScotchlokE-9BM Crimping Tool, with adjustable jaw inserts, crimps Scotchlokdiscrete type connectors and is a maintenance tool for modular splicing.

Selection and Installation of Jaw Inserts

1.Select the jaw insert combination to be used. See Table 1.

2.Remove the jaw inserts from the jaw using a screwdriver. See Figure 1.

3.Install the jaw inserts in the positions selected by pushing the tool firmly against a hard surface until they snap into position.

TABLE 1

Connector Type

Jaw Inserts

 

 

All Scotchlok Butt and Tap type connectors

Thick - Thick

UDW, UIB, UIR and UIY Inline connectors

Thick - Thin

All MS2™ Cross-Connect Modules, all Scotchlok

 

Inline connectors and all 4000 and 4008 Series

Thick-Thin

Modular connectors

 

812032

Figure 1. Removal of jaw inserts

Super-Mini 4005 Bridge & 4005DPM Modules

Thin - Thin

 

 

May 1997

34-7015-5255-5-B

Page 1
Image 1
3M manual Scotchlok E-9BM Crimping Tool, Application, Selection and Installation of Jaw Inserts, May 34-7015-5255-5-B