3M Series 56ZZ, Series 57UL Spray Gun Overview, Contents, Statements and Instructions, Unpacking

Spray Gun Overview

3M spray guns were designed from the inside out for the effective, efficient, economical application of paints, adhesives, coatings and finishes. These spray guns deliver large spray patterns with very low overspray. The soft, tight, adjustable pattern with complete atomization results in a high finish quality and absolute control. Each light weight spray gun is designed for easy handling, reliability and durability and for minimum maintenance costs.

3M’s Automatic HVLP spray guns deliver superior atomization for a wide range of coatings. The standard spray gun

body is made of light weight aluminum. The Zinc HVLP Automatic Spray Gun body is made of composite material. Manufactured for durability and dependability, both versions are easy to maintain for long-lasting performance.

3M equipment is for professional use only. Hazards can occur from equipment misuse. Any misuse of the equipment

or accessories, such as over pressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or damaged parts can cause serious bodily injury, fire, explosion or property damage. Please read and follow all Safety

Statements and Instructions.

Contents

Unpacking

Remove the components from the box. Inspect for concealed damage and/or missing items. If you discover any damage

and/or missing pieces, contact your distributor immediately.

3M™ Series 52 HVLP Automatic Spray Gun

All Series 52 HVLP Automatic Spray Guns are non-bleed spray guns with low pressure air inlets and a manual rear fan control. These spray guns are available with an aluminum gun body, 10 cfm air consumption, 1:1 reduction ratio, ¾” air

inlet connection, and a 10 psi maximum inlet air pressure*.

These spray guns are most commonly used for stationary or reciprocator mounting applications.

* Maximum inlet pressure will yield approximately 10 psi at the air cap.

5