3M X68 - page 19

Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.

 For an RGB signal

The vertical position, the horizontal position, the clock phase

and the horizontal size will be automatically adjusted.

And the aspect ratio will be automatically selected. Make sure that the

application window is set to its maximum size prior to attempting to use this

feature. A dark picture may still be incorrectly adjusted. Use a bright picture

when adjusting.

 For a video signal or s-video signal

The video format best suited for the respective input signal and the aspect

ratio will be selected automatically.

This function is available only when the AUTO mode is selected to the

VIDEO FORMAT item in the INPUT menu (30). For a component video

signal, the signal type is identiﬁed automatically independently of this

function.

 For a video signal, s-video signal or component video signal

The vertical position and horizontal position will be automatically adjusted.

 For a component video signal

The aspect ratio will be automatically selected.

The clock phase will be automatically adjusted.

● The automatic adjustment operation requires approximately 10 seconds. Also

please note that it may not function correctly with some input.

Adjusting the position

1. Press the POSITION button on the remote control.

The “POSITION” indication will appear on the screen.

2. Use the cursor buttons ▲/▼/◄/► to adjust the picture

position.

When you want to reset the operation, press the RESET button on the remote

control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t

do anything, the dialog will automatically disappear after a few seconds.

● When this function is performed at a video signal, a certain extra such as a line

may appear outside a picture.

VIDEO RGBSEARCH

STANDBY/ON

FREEZE

OFF

MAGNIFY

ASPECT AUTO BLANK

MUTE

VOLUME

KEYSTONE

POSITION

ESC

ENTER

RESET