3M G5 manual Instructions for XT-1Headset, Controls and Battery Charging, Order Taking Modes

Adjustment Slide
Instructions for XT-1 Headset
Controls and Battery Charging
Headset Controls
	Battery
Indicator LED
• Green — Headset in Lane 1 Listen
• Amber – Headset in Lane 2 Listen
	Talk Button Lane 2
Volume Up	Volume Down
Page Button —Tap to Change Order Taker
Talk Button Lane 1
Removing Batteries
• Slide and hold the battery release.
• Remove the discharged battery from the battery housing.
• Insert a fully charged battery in the housing with the notch facing the battery
release. Make sure the battery is fully inserted (battery release clicks).
Charging Batteries

To charge a battery, insert the battery in one of the charging slots as shown.	Remove	Replace
• The indicator lights RED to indicate the battery is charging.
• The indicator lights GREEN to indicate the battery is charged.		Charging Status
• Charge batteries after every shift.		Indicator

Headset Cleaning

• For good health and hygiene, every headset should be cleaned on a regular schedule.

• Before cleaning, remove the battery and the soft foam ear pad from the headset and	Battery Charger
microphone windscreen — if used.

•Use a damp soft cloth to wipe the surfaces clean. We recommend using a

3M™ 5040/7065 Cleaning Wipe or a Scotch-Brite®High Performance Cloth.

•DO NOT soak the headset or immerse it in water; you might damage the electronics.

•DO NOT bend the microphone boom.

Order Taking Modes

See your Manager to confirm which Order Taking Mode your headset is using.

Order Taking Mode	Mode Description
Manual Listen	• Headset beeps when vehicle is detected
	• Tap Talk button to turn on Customer Order Point microphone and hear the customer
(ML)
	• Customer Order Point microphone stays on until vehicle departs
Push To Talk	• Push and Hold the Talk button to talk to the customer
(PTT)	• Release the Talk button to turn off microphone so customer cannot hear you (Mute)
Automatic Listen	• Headset beeps when vehicle detected; no buttons to push — automatically hear the customer
(AL)	• Customer Order Point microphone automatically turns on and stays on until vehicle departs
Manual	• Tap the Talk button to talk to the customer
Latching Talk	• Customer Order Point and Headset microphones stay on until you tap the Talk button again
(MLT)	or vehicle departs
Order			Vehicle	Automatic	Order
Taking Mode	Listen	Talk	Detector	Standby	Point
ML/PTT	Manual	Push to Talk	Presence	On	Used
ML/MLT	Manual	Manual Latching	Presence	On	Used
AL/PTT	Automatic	Push to Talk	Presence	On	Used
AL/MTT	Automatic	Manual Latching	Presence	On	Used
Hands Free	Automatic	Automatic	Presence	On	Used
Outside	Manual	Manual Latching	Ignored	Off	Not Used
Always On	Always On	Manual Latching	Ignored	Off	Used

4