A&D UA-767 Plus BT Attaching The Arm Cuff, How To Take Proper Measurements, After Measurement

Models: UA-767 Plus BT

1 14
Download 14 pages 44.97 Kb
Page 8
Image 8

Using The Monitor

Attaching The Arm Cuff

 

Rolling up shirtsleeve

1. Wrap the cuff around the upper

arm, about 2 - 3 cm above the

 

elbow, as shown. Place

the cuff

Cuff

directly against the skin, as

Air Hose

clothing may cause a faint pulse,

and result in a measurement error.

 

2. Constriction of the upper arm,

 

caused by rolling up a shirtsleeve,

2 -3 cm

may prevent accurate readings.

 

3. Confirm that the index

points

Constriction of the Upper Arm

within the proper fit range.

 

 

How To Take Proper Measurements

 

For the most accurate blood

 

pressure measurement:

 

 

Sit comfortably at a table.

 

 

Rest your arm on the table.

Index and Proper fit range

Relax for about five to ten minutes

 

before measurement.

 

 

Place the center of the cuff at the same height as your heart. Remain still and keep quiet during measurement.

Do not measure right after physical exercise or a bath. Rest for twenty or thirty minutes before taking the measurement.

Try to measure your blood pressure at the same time every day.

Measurement

During measurement, it is normal for the cuff to feel very tight. (Do not be alarmed)

After Measurement

After measurement, press the START Remove the cuff and record your data.

button to turn off the power.

Note: The device has an automatic power shut-off function, which turns the power off approximately one minute after measurement.

Allow at least ten minutes between measurements on the same person.

English 6

Page 8
Image 8
A&D UA-767 Plus BT instruction manual Attaching The Arm Cuff, How To Take Proper Measurements, After Measurement