A.O. Smith Water Heater Warranty – Learn About Your Hot Water Heater Warranty

FEATURES

A.O. Smith storage tanks are ideal for use with gas-fired copper heat exchanger equipment for storage of any potable water at temperatures of 180°F (82°C) or lower.

GLASS-LINED TANK - Alkaline borosilicate composition permanently fused to steel by firing at a temperature of 1600°F (870°C), providing years of corrosion protection and dependable use.

MAGNESIUM ANODES - For extra protection.

THREADED OPENINGS - All tanks furnished with threaded openings for thermometer, tankstat, drain valve, relief valve plus 2" NPT recirculation lines.

SMALL FOOTPRINT - Compact. Fits through 30" door.

WORKING PRESSURE 150 PSI (1030 kPa)

HANDHOLE CLEANOUT - Standard on T200V.

OPTIONS

Perfectly balanced manifold kits allow installation where up to 4 tanks are required.

Insulation kits for field installation.

VERTICAL

HOT WATER STORAGE TANKS

T120V, T200V

L	CRN
W

(ON ASME CONSTRUCTED TANKS)

LIMITED WARRANTY OUTLINE

If the tank should leak any time during the first three years, under the terms of the warranty, A. O. Smith will repair or replace the tank; installation, labor, handling and local delivery extra. THIS OUTLINE IS NOT A WARRANTY. For complete information, consult the written warranty or A. O. Smith Enterprises Ltd.

May 2000 A 408.0C