OPERATING INSTRUCTIONS
Fig. 7 Fully Closed Fig. 8 Fully Open
Even when all the slots are completely shut a "bleed" of secondary air will be maintained ensuring that inflammable gases are burnt off.
DISASSEMBLE AIRWASH
The Aarrow air wash may be disassembled for cleaning or adjustment. To achieve this, the following procedure should be followed:
•The door should be GENTLY lifted off its hinges so that the below operations can be carried out on a workbench or similar level surface.
This should be done when the appliance is cold.
Fig. 9 Rear of the fire door
•Remove the glass by unscrewing the top and bottom nuts.
•Carefully remove the glass and lift airwash cover off.
•Unscrew the airwash spring knob from the sliding plate.
•Remove assembly from the appliance. •Clean and/or adjust.
•Refit using reverse procedure.
MULTI - PURPOSE OPERATING TOOL
Your Aarrow stove comes with a
multifuel grate position and for emptying the ash pan. (Fig. 10)
Fig. 10
RIDDLING
Use the operating tool for setting the grate in the coal burning position or the wood burning position. This means that effective
FIRE DOOR GLASS
In the event of the door glass being broken it can easily be replaced:
•The door should be GENTLY lifted off its hinges so that the below operations can be carried out on a workbench or similar level surface. This should be done when the appliance is cold.
•Unscrew the four nuts, on the inside of the door. •Remove the upper airwash cover and the two lower glass clips.
•Carefully remove any pieces of broken glass, and sealing gasket wearing suitable gloves.
REFIT NEW GASKET
•The fitting of new gasket is shown below (Fig.11a)
Fig. 11a fitting new door gasket
Acorn Multifuel Stoves | 17 |
