INSTALLATION
ADJUSTING THE SELF | WOOD STOVE VERSION - |
LEVELLING FEET | WOOD TRAY |
The Aarrow Ecoburn Wood and Multifuel stoves are equipped with adjustable rear levelling feet, these are ideal for use where the hearth surface is not flat or level.
Adjustment is as follows:
•Position the stove on the hearth into its final rest- ing place, ensuring room for the flue connections etc.
•On the rear leg of the stove, loosen the pozi screw, and rotate the inner ‘cam’ shaped levelling foot until this touches the hearth. (See Fig. 4.).
•Repeat for the other rear leg.
The wood burning tray should come fitted in your stove, if not please follow these instructions -
•Fully open the fire door, and remove the two round fuel retaining bars,
•Locate the front of the wood tray, this is the end with no tabs protruding from each side,opposite to the rear end with the tabs protruding either side.(See Fig. 5.)
•Holding the front edge of the wood tray, carefully insert the wood tray into the firebox, taking care not to damage the paint work and side / rear liner pan- els.
•Engage the rear lugs into the slots athe the rear of the side landings. Then lower the front of the tray until this rests onto the front brace of the stove.
(See Fig. 6.)
Front | Rear Lug |
|
Fig. 4. Adjusting the rear feet | Fig. 5. Wood tray identification |
Fig. 6. Wood Tray Installed
14 | Aarrow Ecoburn Wood & Multifuel Stoves |