![](/images/new-backgrounds/1060712/6071235x1.webp)
Installation and Setup
5.Push the clip in until it snaps into the slot flush with the surface and only the legs on the clip are sticking up.
Remove clip, turn 180 degrees, and reinsert clip.
6.Place the handset into the phone’s cradle, inserting the legs on the clip into the square hole on the handset. This allows the handset to rest in the cradle in a vertical position without slipping off when the phone is installed on the wall.
Clip
Square Hole on Handset
12Model 6730i IP Phone Installation Guide