Model 6757i CT RP Phone Installation Guide 17
Installation and Setup – 6757i CT RP Base Unit
Desk or Wall Installation
Install on the Desk
The desk installation for the 6757i CT RP phone consists of two legs that
attach to the back of the phone near the top corners. A total of four
different viewing angles allows users to personalize their phone viewing
preference.
Attach each leg by inserting the tabs on the leg into the slots on the bottom
of the phone. There are three pair of leg slots on each corner of the phone;
each leg uses two pairs (1&2, or 2&3) giving two leg positions designating
different viewing angles. Furthermore, the legs can be reversed which
offer two additional viewing angles.
For a higher viewing angle, use the second and third slots from the top. For
a lower viewing angle, use the first and second slots from the top. Then
push the stand towards the phone until it snaps into place.
Three stand slot locations
for customizing the height
of the desk phone.
Four Different Viewing Angles
20.7 deg.
Incline Angle 23.3 deg.
Incline Angle 26.6 deg.
Incline Angle 30.9 deg.
Incline Angle