8 Assemble Window
TF (1)
a. Remove plastic sheeting from Window (AE) and slide Window into slot | TH (4) | |
on the Window Wall Panel (125). Attach a Window Latch (TK) above each | ||
corner of the Window as shown. When tightening screws (TH), be sure |
| |
that Window Latches will slide freely. Do not overtighten. Insert screw (TF) | TK (2) | |
into the hole in the window. Set panel aside. | ||
|
AE
Insert window with bent edge at top and pointing away from the wall.
Place Screw (TF) in this hole to keep window from sliding up too far. Insert until flush with the window
7
