CHANGING THE SHRED BAG

When the Shred Bag (10) is full, the shredder will automatically shut down. On the electronic models an LED indicator will light and an audible alarm will sound. Changing the Shred Bag is quick and easy if you follow these simple directions.

1.Turn shredder off.

2.Open Door (12) using Door Handle (11) to expose Waste Bin (10) and Shred Bag (9).

3.Pull the Waste Bin and full Shred Bag out of the shredder.

4.Dispose of full Shred Bag.

5.Install new Shred Bag in Waste Bin, draping end of Shred Bag over edge of Waste Bin.

6.Push Waste Bin, with new Shred Bag installed, back into shredder.

7.Close Door (12).

8.Turn on shredder and continue shredding.

CARING FOR YOUR SHREDDER

Clean covers with a clean dry cloth. Do not use water or solvents. Make sure you disconnect your shredder from its power source before cleaning.

Paper shredders, like all mechanical equipment, need proper maintenance to ensure efficient operation. Periodic lubrication of the cutting blades is important to offset the friction generated within the cutting head. Frequency of lubrication will vary depending on the shred size and the amount of usage. A strip-cut shredder receiving light use (1 – 2 hours per week) will require lubrication only once or twice a month, while the same machine used 1 – 2 hours per day will require lubrication weekly. A cross-cut shredder should be lubricated every ½ hour of shredding time to maintain maximum capacity and efficiency.

The procedure for lubricating your shredder is simple, and can be performed by any operator. The oil is packaged in a squeeze bottle and is applied directly to the cutting blades through the feed opening (3). Run a fine stream of lubricant from one side of the feed opening to the other. Run the shredder in REVERSE for a few seconds to help distribute the lubricant evenly. You can now continue shredding as usual.

DAHLE Shredder Oil is the only lubricant you should use in your paper shredder. It has been specially formulated so as not to leave any residue that could attract dust and clog the shredding mechanism. You can order DAHLE Shredder Oil (item # 740) from your local dealer.

Repairs on your paper shredder should only be performed by qualified technicians. . If you need service, contact your local dealer

NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED

SAFETY INSTRUCTIONS

•Read the operating instructions carefully before operating your shredder!

•Do not use in the vicinity of flammable liquids or gases.

•Do not use in the vicinity of corrosive materials.

•Do not expose to water or wet conditions.

•Do not let children operate this, or any other, office equipment.

•Do not reach into the cutting mechanism during operation - not even from the top or with objects.

•Do not operate the shredder for a period of more than 5 minutes in no-load operation (operation without paper).

•Keep hair clear of machine.

•Keep neckties clear of machine.

•Keep bracelets, or any other jewelry, clear of machine.

•Power connection must be accessible at all times.

•Disconnect from power supply before servicing.

•The safety devices must not be disabled or removed.

•Please make sure that the shredder gets sufficient ventilation (ventilating grills must kept free).

BEFORE YOU SHRED

•Remove Transport Bolts with wrench provided.

•Record the Model and Serial Number in the space provided inside the front cover.

•Be sure the electrical outlet provides the proper power for your shredder (see rating label on rear of shredder).

•Install Shred Bag (see: “CHANGING THE SHRED BAG”).

TURNING ON YOUR SHREDDER

20801 S • 20801 C

1.ON, OFF and REVERSE are controlled by the black Rocker Switch (8a) on the top of the shredder.

2.Moving the switch to the “I” (ON) position activates the shredding mechanism.

3.Moving the switch to the center or “O” (OFF) position turns the shredder off.

4.The REVERSE position “R” will be discussed in “CLEARING A PAPER JAM”.

ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME