DAHLE Shredder Oil is the only lubricant you should use in your paper shredder. It has been specially formulated so as not to leave any residue that could attract dust and clog the shredding mechanism. You can order DAHLE Shredder Oil (item # 740) from your local dealer.

Repairs on your paper shredder should only be performed by qualified technicians. . If you need service, contact your local dealer

BEFORE YOU CALL FOR SERVICE

SYMPTOM
POSSIBLE CAUSES
SOLUTION
No Power

1.

Power button not pressed

Press button (green light

 

 

 

turns on)

 

2.

Unit unplugged

Connect to outlet

 

3.

Outlet dead

Reset circuit breaker

 

4.

Door not fully closed

Close Door

Low capacity

5.

Shred Bag full

Change Shred Bag

1.

Cutting blades dry

Lubricate cutting blades

 

 

 

according to instructions.

NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED

SAFETY INSTRUCTIONS

•Read the operating instructions carefully proir to starting up the unit!

•Do not use in the vicinity of inflammable liquids or gases.

•Do not use in the vicinity of corrosion materials.

•Do not expose to the wet.

•Do not let children operate this office equipment.

•Do not reach into the cutting mechanism during operation - not even from the top or with objects.

•Do not use the shredder over a period of more than 5 minutes in no-load operation (operation without paper).

•Keep long hair clear of machine.

•Keep neck-ties clear of machine.

•Keep bracelets clear of machine.

•Power supply must be accessible all the times.

•Disconnect power supply before servicing.

•The safety devices must not be manipulated with or removed.

•Please make sure that the shredder gets sufficient ventilation (ventilating flaps must kept free).

BEFORE YOU SHRED

•Remove Transport Bolts with wrench provided.

•Record the Model and Serial Number in the space provided inside the front cover.

•Be sure the electrical outlet provides the proper power for your shredder (see rating label on rear of shredder).

•Install Shred Bag (see: “CHANGING THE SHRED BAG”).

TURNING ON YOUR SHREDDER

1.ON, OFF are controlled by the green push button (8) found on top of the shredder.

2.Press this button turns the shredder on And places it in the stand-by mode.

3.Pressing the button again turns the shredder off.

ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME