The entire machine is dispatched in one package, but the stand has been dismounted from the machine.

The tool box contains:

-a set of tools for service and maintenance,

-the mounting hardware for the stand,

-the back gauge crank (#3) with a mounting screw,

-two keys for safety lock.

∙Place machine (#1) on stand (#8).

∙Insert the four securing bolts for the stand into provided holes and secure with nuts.

∙Place paper tray (#10) into the stand (#8).

∙For models IDEAL 4850, IDEAL 4850-90, and IDEAL 5250, connect power cord with plug to a normal single phase AC socket.

The models IDEAL 6550 and IDEAL 6550-90 must be connected to a 5-point, 3 phase current source. If, when switched on the machine should fail to operate, then the phase sequence of the machine does not coincide with that of the power source. To rectify this one must swap the brown (or red) wire with a black one in the plug of the machine.

The machine is now ready to be operated.

Performance

All paper qualities and light cardboard (up to a weight of 200 g/m²) can be cut using the full cutting height and cutting length of the machine.

 

4850

5250

6550

 

4850-90

 

6550-90

Cutting Length

475 mm

520 mm

650 mm

 

(18-3/4”)

(20-1/2”)

(25-1/2”)

Cutting Height

80 mm

80 mm

80 mm

 

(3-1/8”)

(3-1/8”)

(3-1/8”)

Table Depth

460 mm

520 mm

610 mm

 

(18-1/8”)

(20-1/2”)

(24”)

Narrow Cut

30 mm

35 mm

35 mm

 

(1-3/16”)

(1-3/8”)

(1-3/8”)

With the false clamp mounted on models IDEAL 6550 and IDEAL 6550-90 the cutting height is reduced to 75 mm (3”), and the narrow cut is 50 mm (2”).

Features and Operation

∙Main Switch (#13)

Turn main switch (#13) to position “” (on), in order to begin operation. The main switch can also be used as an EMERGENCY SWITCH, which stops the machine immediately.

∙Safety lock with key (#7)

3