This motherboard provides two 184-pin DDR DIMM slots for un-buffered and non-ECC modules,
memory size expansible up to 2GB (DDR400).
DIMM DIMM Module Total Memory
1 256MB, 512MB, 1GB 256MB ~ 1GB
2 256MB, 512MB, 1GB 256MB ~ 1GB
Total System Memory 256MB ~ 2GB
Power off the computer and unplug the AC power cord before installing or removing memory
modules.
1. Locate the DIMM slot on the board.
2. Hold two edges of the DIMM module
carefully, keep away of touching its
connectors.
3. Align the notch key on the module with
the rib on the slot.
4. Firmly press the module into the slots
until the ejector tabs at both sides of the
slot automatically snaps into the mounting notch. Do not force the DIMM module in with
extra force as the DIMM module only fit in one direction.
5. To remove the DIMM modules, push the two ejector tabs on the slot outward
simultaneously, and then pull out the DIMM module.
※ Static electricity can damage the electronic components of the computer or
optional boards. Before starting these procedures, ensure that you are
discharged of static electricity by touching a grounded metal object briefly.
2-10 SG-80DC