802.11g Wireless Router

Quick Installation Guide
1
1. One Wireless G BroadBand Router
2. One Power Adapter
3. One Ethernet Network Cable
4. One Set-up CD-ROM wit h User’
s
Guide
5. One Quick Installation Guide
Before you begin, ensure that the Wireless
Router, the DSL/Cable modem supplied by
your IP Provider, and PC are turned off.
Connect your DSL/Cable Modem to t he
Internet port on the Wireless Router using a
standard RJ-45 Ethernet cable.
Connect an Ethernet cable to one of the LAN
ports on the back o f the Wireless Router to
the Ethernet port on your PC.
Turn on the DSL/Cable modem first.
Then turn on your wireless router.
Check the LEDs:
• The Power, Internet, and WLAN LEDs
should be ON.
• For each active LAN (PC) connection, the
LAN Activity LEDs (1-4) should be ON.
Turn on your PC.
Before setting up the Wireless Router, make sure your
PCs are configured to "Obtain an IP (or TCP/IP) address
automatically".
Please refer to the User's Guide found on the CD.
1. Go to Start Control Panel
Network and Internet
Connections (Right-
click on) Local Area
Connection Properties.
2.
Make sure the box next to Internet Protocol (TCP/IP)
is checked. Click the Internet Protocol (TCP/IP)
click the Properties button.
3. Select "Obtain an IP address automatically".
Select "Obtain DNS server address automatically".
Then click OK to complete the PC configuration.
4.
Restart your computer.
For Windows 2000 & XP users, your computer
should obtain an IP Address automatically from
the Wireless Router's DHCP Server, after you've
done the above steps and restarted your computer.
Check for Packing List:
Application Diagram
Connect the 802.
11g Wireless
Router
Notes
Existing Connection
For Windows 98/ME/Macintosh
For
Windows 2000 & XP
Router Configuration
(
f
or
Internet
Access
)