BHC110 -- Bluetooth Headset Quick Installation Guide

Buttons

Starting to Use

How to Charge

Plug the charger into the headset. Plug the other end of the charger into an electrical outlet. During the charging, the red LED turns on and remains on until charging is complete. When charging is complete (red LED is off), remove the charger form the electrical outlet and detach the charger from the speaker.

Pairing Your Headset and Phone

Before you can use your Bluetooth headset you’re

your phone it has to be added once to the phone. Follow the instruction form the phone user guide on how to turn on the Bluetooth in your phone. With the headset and phone in close proximity:

1.Make sure the headset is in power off. Press the power button for 6 seconds until the blue and red LED flashes.

2.Initiate the pairing sequence using hands-free mode if available. The unit may also be paired in headset mode if hands-free mode is not available.

3.Perform a device discovery from the phone.

For details on device discovery for your phone, refer to the user guide for the phone.

4.Select the Mono Headset from the discovered devices list, and then confirm following the on screen prompts.

5.When prompted by the phone, enter the passkey

0000, and then confirm to pair the headset with the phone.

Controlling Headset Volume

Increase: Press the volume button in the + position repeatedly until you reach the desired volume level. Decrease: Press the volume button in the - position repeatedly until you reach the desired volume level.

Placing and Receiving Calls

Your headset supports both Hands-free and Headset Profiles. Accessing call functions depends on

which profile your phone supports.

Action

Function

Very Long Press Power

Pairing

 

 

 

Power On

Long Press Power

 

Power Off

 

 

 

Reject a Call

 

 

 

Receive a Call

Short Press Power

 

End a Call

 

 

 

Voice Dial

 

 

Long Press Redial

Redial

 

Call Transfer

 

 

 

Short Press Redial

Mute On

 

Mute Off

 

 

 

Using Your Headset Indicators

LED

Headset

OFF

Power Off

 

 

Red/Blue rapid flashes

Pairing mode

 

 

Blue flashes

Power On

 

 

Red On

Charging

 

 

Red flashes

Power Low

 

 

Red flashed 5 times

Powering Off

 

 

Page 1
Image 1
Abocom BCH110 manual Buttons Starting to Use

BCH110 specifications

The Abocom BCH110 is a cutting-edge compact network switch designed to cater to various networking needs, ranging from home offices to small and medium-sized businesses. This versatile device is recognized for its efficiency, reliability, and user-friendly features, making it an ideal choice for enhancing connectivity in diverse environments.

One of the standout features of the BCH110 is its compact form factor. With a sleek design, it can easily fit into small spaces without compromising on performance. The switch is equipped with multiple Gigabit Ethernet ports, which provide high-speed data transfer rates. This enables seamless connectivity between devices, allowing for optimized network performance and minimal latency.

The BCH110 incorporates advanced technologies such as VLAN (Virtual Local Area Network) support, which enables users to segment network traffic for better performance and security. This feature is particularly beneficial in office settings where data protection and efficient bandwidth allocation are critical. Additionally, the switch supports Quality of Service (QoS), allowing users to prioritize traffic for sensitive applications such as VoIP and video conferencing.

Power over Ethernet (PoE) capability is another significant characteristic of the BCH110. This feature eliminates the need for separate power sources by allowing devices such as IP cameras and wireless access points to receive power through the same Ethernet cable used for data transfer. This not only simplifies installation but also enhances flexibility in network design.

The user-friendly interface makes configuration and management straightforward, with options for both web-based management and simple plug-and-play setup. Users can easily monitor network activity and manage settings without needing extensive technical expertise.

Furthermore, the BCH110 is built with durability in mind, featuring robust hardware that ensures reliable operation even in demanding environments. The energy-efficient design reduces power consumption while delivering optimal performance, making it an eco-friendly choice for conscious consumers.

In summary, the Abocom BCH110 is a feature-rich network switch that combines performance, efficiency, and ease of use. With its compact design, multiple Gigabit ports, VLAN support, PoE capability, and user-friendly management, it stands out as an excellent choice for those looking to enhance their network infrastructure without compromising on quality or performance. Whether for home or office use, the BCH110 is a reliable solution that meets the demands of modern connectivity.