HARDWARE INSTALLATION

1.Hold the CardBus PC Card with wide connector toward the slot and the brand label facing upward.

2.Insert the CardBus PC Card and push it firmly

into the bottom. (Please see the following figure for reference)

N otebook

3.Connect the RJ-45 port of the CardBus 10/100 Ethernet PC Card Adapter to a Category 5 Network cable before loading any network driver.

For operation in the 100Mbps (100Base-TX) Ethernet network, a Category 5 unshielded twisted pair (UTP) cable should be used to connect between the RJ-45 port and a 100Mbps hub or switch.

For operation in the 10Mbps (10Base-T) Ethernet network, a Category 3, 4 or 5 unshielded twisted pair (UTP) cable could be used to connect between the RJ-45 port and a 10Mbps hub or switch.

-1 -