INSTALLATION

Hardware Connections & LEDs Indicators

Insert the PCMCIA Ethernet card into the PCMCIA slot of your notebook

RJ-45Port: Connect one end of the Ethernet cable into the card’s RJ-45 port. Plug the other end of the cable into a switch hub.

Link LED indicator: lights green when 10M Network is linked

ACT LED indicator: blinks green when transmitting/receiving data

Power LED indicator: lights yellow when receiving power

Software Installation

Insert the driver diskette into the floppy drive and set the current drive to the floppy drive. Then run INSTALL to install the real mode drivers such as ODI or NDIS 2.x or Packet Drivers into the target disk.

- 3 -