HARDWARE INSTALLATION
The switch is considered as a “plug and play” network device and requires no special setup procedures. Connect the power cord and cables correctly and you are ready to go.
Switch installation
1.Put the switch on the appropriate location. When you install the switch, there are two things needed to be considered:
Location: Your switch should be located in a place that is central to your home/office space and allows all computers and networked devices connected to your switch.
Power: Remember to locate your switch near electrical outlet.
2.Power on the switch by connecting the power cord.
3.Verify if the power (POWER) LED is on. If the POWER LED does not light up, check the power cord and power outlet to verify its connection. If it still remains unlit, please contact your dealer for support.
Ethernet Port Connection
Connect user machines, servers, another switch, hub, or any other devices to the Ethernet ports on this switch with either straight through or crossover Ethernet cables.
- 3 -
