HARDWARE INSTALLATION
Hub installation
The hub is considered as a “plug and play” network device and requires no special setup except for plugging the appropriate power cord and cables.
1.Put the hub on the appropriate location. When you install the hub, there are two things needed to be considered:
Location: Your hub should be located in a place that is central to your home/office space and allows all computers and networked devices connected to your hub.
Power: Remember to locate your hub near electrical outlet.
2.Power on the hub by connecting the power cord.
3.Verify if the power (POWER) LED is on. If the POWER LED does not light up, check the power cord and power outlet to verify its connection. If it still remains unlit, please contact your dealer for support.
Ethernet Port Connection
Connect user machines, servers, another switch, hub, or any other devices to the Ethernet ports on this hub with either straight through or crossover Ethernet cables.
- 4 -
